User Area > Advice
Typical error message found in the LUSAS Solver text output file (*.OUT):
***DATABASE ERROR*** ERROR
DURING I/O , IOSTAT= 413
Causes & links to solutions
This means that a file is already
connected to a different unit. The program tried to connect
an already connected file to a new unit. A file can be connected
to only one unit at a time. This message is issued when
the error condition is not one of the more common conditions
for which specific error messages are provided. It is
typically a result of one or more of the following:
- The results file from a previous analysis is still open in
Modeller when Solver attempts to write a new results file.
Close the results file in Modeller before running the analysis.
- File being solved over
a network connection. Save the file in a suitable
location
- The file may be locked by another application. This can occur
with some backup programs and has also been known to occur with
anti-virus checkers. Close other applications
- For a multi-step analysis such as nonlinear or dynamic, the
results file has been closed by Modeller, but Solver does not
recognise that the file has been released. This causes a file
violation error when solver tries to write a new set of results.
This would be the result of a corruption of the file during the
analysis because of network problems. If this is the case it
will be remedied by running the analysis again.
Still
encountering problems? Try the
database error checklist
More on where to store
your model and *.DAT files
More on where to
locate temporary files
|
